Zhejiang KRIPAL Electric Co., Ltd.
Zhejiang KRIPAL Electric Co., Ltd 30 years experience in manufacturing ac contactor, rotary isolator switch, industrial plug socket, molded case circuit breaker and etc
Add to Cart
2P / 3P Standard Magnetic Type Molded Case Circuit Breaker AC600V 10A 16A 20A 32A 40A 50A 63A
UKM30-63S 2P/3P Standard Magnetic Type Molded Case Circuit Breaker AC600V 10A 16A 20A 32A 40A 50A 63A
Brief Introduction
UKM30 series moulded case circuit breaker (circuit breaker for short) is high-tech products in 21st century with advanced design,high performance,pleasant appearance and delicate dimension. Meanwhile, they are intelligent controlled and developed with microelectronic technology.
Usage & Appliance
The circuit breaker is used in the electrical system of AC 50Hz,related voltage of up to 690V, rated current of up to 800A to prevent the system from overload,short-circuit and under-voltage and to control the infrequent operation of motor.
Standards
It is complied with GB1408.2 and IEC60947-2 section 2 and etc.
Normal operation condition
The circuit breaker could be used in the following working conditions:
A. Ambient air temperature not higher than +40 ℃ and not lower than -5 ℃.
B. Altitude no more than 2000m
C. The relative air humidity is not more than 50% in the max at the temperature of +40 ℃. The higher relative humidity is allowable at the lower temperature. The lowest monthly average temperature not higher than 25 ℃ in the most moist month and the max relative humidity should be no more than 90%.
D. Pollution degree:Grade 3. Three is no explosion factor, corrosive metal and the gas destroying the insulation and the electric dust.
E. Installation type:Ⅲ
F. The terminals of 1,3,5,N1 should be connected with the power supply and the terminals of 2,4,6,N2 should be connected with the load. Reverse wiring is forbidden.
Low-voltage power distribution network
Control and protection of motor
Dual power changeover system
UKM30-63S 2P/3P Standard Magnetic Type Molded Case Circuit Breaker AC600V 10A 16A 20A 32A 40A 50A 63A
Order No.
| Model | Current (A) | Poles (P) |
| UKM30-63S 10A 2P | 10 | 2 |
| UKM30-63S 16A 2P | 16 | 2 |
| UKM30-63S 20A 2P | 20 | 2 |
| UKM30-63S 32A 2P | 32 | 2 |
| UKM30-63S 40A 2P | 40 | 2 |
| UKM30-63S 50A 2P | 50 | 2 |
| UKM30-63S 63A 2P | 63 | 2 |
| UKM30-63S 10A 3P | 10 | 3 |
| UKM30-63S 16A 3P | 16 | 3 |
| UKM30-63S 20A 3P | 20 | 3 |
| UKM30-63S 32A 3P | 32 | 3 |
| UKM30-63S 40A 3P | 40 | 3 |
| UKM30-63S 50A 3P | 50 | 3 |
| UKM30-63S 63A 3P | 63 | 3 |
Main technical parameter
| Rated current (A) | 10,16,20,32,40,50,63 | |
| Poles (P) | 2,3 | |
| Rated insulation voltage Ui (V) | AC600 | |
| Arcing distance(mm) | ≤50(0*) | |
| Rated ultimate / service short-circuit breaking capacity (KA) | AC690V | - |
| AC400V | 10/5 | |
| AC230V | 25/13 | |
| Operational performance (times) | ON | 6000 |
| OFF | 8500 | |
| Weight (kg) | 0.75 | |
| Rated operation frequency (per hour) | 120 | |
*0 arcing distance: please specify when ordering if you require.
Dimension (mm)
| a | 75 |
| b | 130 |
| c | 68 |
UKM30-63S 2P/3P Standard Magnetic Type Molded Case Circuit Breaker AC600V 10A 16A 20A 32A 40A 50A 63A